Pick cm or inches
Create a metric ruler for centimeters or an imperial ruler for inches depending on your project.
Generate a clean Online Ruler printable ruler, set length and DPI/PPI, then download a PNG for accurate paper measurement.
Printing guide
For best results, print at actual size. Disable fit-to-page, scaling, and shrink options in your print dialog.
Create a metric ruler for centimeters or an imperial ruler for inches depending on your project.
Set the DPI/PPI to match your document or printer workflow. 300 DPI is a common print baseline.
After downloading, print at actual size and verify one mark with a known measurement.
PRINTING IN DETAIL
The generator above draws every mark true to size. What happens next is decided by your printer dialog — and that is where most printed rulers quietly go wrong. Four things decide whether the ruler on paper matches the ruler on screen.
Most print dialogs default to Fit or Shrink to fit, which scales the page down to the printable area — a few percent smaller, without telling you. A few percent sounds harmless until you measure with it: at 97% scaling, a true 10 cm span prints as 9.7 cm, and every measurement you take with that ruler inherits the error. Choose Actual size, or a manual scale of 100%, every time.
Never trust a printout you have not checked. Measure one printed span against a physical ruler if you have one — or against a bank card: every bank and ID card is exactly 85.60 mm wide under the ISO/IEC 7810 standard. If the card's edge lands short of or past the 85.6 mark on your print, adjust the generator's scale by the same proportion and print again.
A4 measures 210 × 297 mm (8.27 × 11.69 in); US Letter measures 215.9 × 279.4 mm (8.5 × 11 in). Generate the ruler for the paper actually loaded in the tray — a ruler built for one sheet and shrunk onto the other by a helpful Fit setting is wrong twice over. Length matters too: a 30 cm ruler needs the long edge of A4 in landscape, and most home printers keep a few millimetres of margin unprinted, so expect to lose a little at each end.
The generator asks for a DPI because the image is built from pixels: at 300 DPI, one millimetre is about 11.8 pixels and a 10 cm ruler is 1,181 pixels wide, so even the smallest ticks print as clean lines. Send that same image through a workflow that assumes 96 DPI and it comes out roughly three times too large. Keep the DPI you generated at consistent from download to print dialog.
A ruler is only as straight as the sheet it lives on. Thin copier paper curls as the ink dries and flexes every time you use it; card stock or a laminated sheet stays flat and keeps its length. For a ruler that will live in a toolbox or sewing kit, print on the heaviest stock your printer accepts, let it dry fully before verifying the scale, and store it flat rather than rolled.
FAQ
Choose a 100% generator scale and print at actual size with fit-to-page disabled. Verify the printed marks against a physical ruler. Not sure which sheet your printer holds? A4 and US Letter differ by millimetres that matter at 100% — the paper sizes guide lists every common sheet in cm and inches.
Yes. Use the Download PNG button after generating the ruler.
Use landscape for longer rulers and portrait for a compact page layout.
Yes. The Online Ruler printable ruler is free and runs in your browser.
RELATED TOOLS
Measure real objects on screen with calibrated centimeter, millimeter, inch, and pixel scales.
Open rulerMeasure and compare angles with an interactive 180°/360° online protractor.
Open protractorEvery length at true physical size — centimetres and inches on one index.
Open the size index85.60 × 53.98 mm — the ID-1 standard at true size
See the cardA printable ruler generator creates centimeter or inch markings for a selected paper size. Print at actual size and compare the finished ruler with a known physical reference before relying on it.
The generator converts the chosen physical dimensions to output pixels using the selected density. Choose a scale of 100% for nominal actual size. Larger or smaller scale settings deliberately change the printed dimensions. The PDF button opens the print dialog, where you can choose Save as PDF; it does not download a PDF directly.
Print dialogs, document editors, PNG resizing, printer calibration, and page margins can change the final scale. A correct file does not guarantee an accurate print. Check a known length after printing.
Maintained by Imran Ahmed, Online Ruler. Contact us about an error or a source that needs updating.