Display & Print Tools

PPI Calculator

Calculate screen pixel density, check sharpness at your viewing distance, size images for print, and compare displays side by side.

PPI Calculator

Your current screen

—PPI
—Detected resolution
—Screen diagonal
—Device pixel ratio

Enter your screen diagonal to complete the PPI and sharpness summary.

Your browser reports resolution and pixel ratio, but cannot reliably measure screen size. Enter the actual diagonal in inches to calculate physical PPI. Scaling and zoom may affect the detected resolution.

60 cm

Result

—PPI
Resolution—
Screen diagonal—
Total pixels—
Aspect ratio—
Retina threshold—
Retina verdict—
Dot pitch—
Diagonal pixels—

Based on a one-arcminute visual acuity model. Actual perception varies with eyesight, contrast, and content.

Enter positive numbers for all dimensions.

Complete Guide

What does a PPI calculator tell you?

A PPI calculator measures how closely pixels are packed on a screen. Divide the diagonal resolution in pixels by the diagonal size in inches to find pixels per inch. This helps you compare the potential sharpness of monitors, phones, tablets, laptops, and TVs.

Resolution alone does not tell the whole story. A smaller display with the same pixel count has a higher density. Use the screen and comparison modes to explore that difference, the viewing-distance control to estimate pixel visibility, and the print mode to find image dimensions for your chosen paper size.

Who can use this pixel density calculator?

Designers and developers can compare screen density when preparing image assets and interfaces. Photographers can estimate the pixels needed for a print. Students can explore the Pythagorean theorem, while shoppers can compare screens beyond labels such as Full HD and 4K. A 27-inch 4K monitor is about 163 PPI; a 32-inch 4K monitor is about 138 PPI.

How to use the calculator

  1. Auto Detect: read browser-reported resolution and pixel ratio, then supply your screen's physical diagonal. Re-detect after moving to another display. Browser detection is an estimate; manufacturer specifications are the best source for native resolution.
  2. Screen: enter diagonal size and pixel width and height, or select a preset. Adjust viewing distance from 10 to 300 cm to compare screen density with an estimated Retina threshold.
  3. Print: enter paper width and height in inches and choose a target DPI. The calculator returns the required image dimensions, megapixels, and aspect ratio. For example, 8 × 10 inches at 300 DPI needs 2400 × 3000 pixels.
  4. Compare: add up to four displays and enter their diagonal size and resolution. Each card updates independently, letting you compare a phone, laptop, tablet, or monitor without losing your other inputs.

PPI and DPI: screen pixels versus printed dots

PPI describes the number of display pixels per inch. DPI describes the number of ink dots a printer can place per inch. For print image sizing, multiply the intended size in inches by the desired image resolution, often 300 pixels per inch. Printer hardware DPI and image PPI are related concepts, but one image pixel may be produced using several ink dots.

How viewing distance affects Retina sharpness

A display does not need one fixed PPI value to look smooth at every distance. Using a one-arcminute visual acuity model, the estimated threshold is 3437.75 divided by viewing distance in inches. That is about 291 PPI at 30 cm, 146 PPI at 60 cm, and 29 PPI at 3 meters. These are estimates for typical visual acuity, rather than guarantees for every viewer or official display certifications.

The formula behind pixels per inch

Find diagonal pixels using √(width² + height²), then divide by diagonal inches. A 3840 × 2160 display has about 4406 diagonal pixels, giving about 163 PPI at 27 inches. Dot pitch is 25.4 ÷ PPI in millimeters, so that display's pixel spacing is about 0.156 mm.

FormulaPPI = √(W² + H²) ÷ D

PPI guide

How to calculate PPI

PPI is diagonal pixels divided by diagonal inches. It helps compare how sharp screens look at similar viewing distances.

01

Use resolution

Enter width and height in pixels, such as 1920 × 1080 or 3840 × 2160.

02

Add diagonal size

Use the screen diagonal in inches to calculate pixels per inch and dot pitch.

03

Compare density

Phones usually have high PPI for close viewing, while TVs can use lower PPI because they are viewed farther away.

FAQ

PPI calculator questions

What does PPI mean?

PPI means pixels per inch. It measures how many pixels fit into one inch of a display.

How is dot pitch calculated?

Dot pitch in millimeters is calculated as 25.4 divided by PPI.

Is DPI the same as PPI?

DPI is often used for print and PPI for screens, but people sometimes use them interchangeably for pixel density.

Can I compare two monitors?

Yes. Calculate each display and compare PPI, dot pitch, and total megapixels.

How is screen size calculated from diagonal and aspect ratio?

The width and height are calculated using the Pythagorean theorem.

What is the actual width of a 65-inch 16:9 TV?

A 65-inch 16:9 television has a physical width of approximately 56.65 inches.

Does aspect ratio affect the physical size of a screen?

Yes, dramatically. Two screens with the same diagonal but different aspect ratios will have different width and height.

Why does pixel density matter when choosing a screen?

Higher density packs more pixels into the same physical area, which can make text and edges look smoother at a given distance. Two 1080p displays can have very different PPI if their diagonal sizes differ.

Which density should I use for screens and printed images?

Use the display's native resolution and diagonal for screen PPI. For printed images, choose an image resolution appropriate for the size and viewing distance; 300 pixels per inch is a common starting point for detailed prints.

What image size is needed for an 8 × 10 print at 300 DPI?

Multiply each side in inches by 300. An 8 × 10 print needs 2400 × 3000 pixels, or 7.2 megapixels. Print mode calculates other sizes using the same method.

Where can I get my display's physical PPI?

Use the manufacturer's native pixel resolution and diagonal size, then enter both in Screen mode. Auto Detect can help with resolution, but a browser cannot reliably determine the physical diagonal.

Why can detected resolution differ from my device specifications?

Browser zoom, operating system scaling, device pixel ratio, and multiple monitors can affect reported dimensions. Browser-reported pixels multiplied by device pixel ratio are an estimate, so use native specifications when accuracy matters.

Will a higher PPI always look noticeably sharper?

The improvement becomes harder to see as pixels get smaller relative to viewing distance. Eyesight, contrast, display quality, and scaling also influence sharpness; PPI alone cannot describe the entire viewing experience.

How reliable are these density and Retina results?

The density formula is exact for the supplied resolution and diagonal. Rounded screen sizes and detected resolution introduce uncertainty. The Retina check is an estimate based on viewing distance and a visual acuity model, not an eyesight test.

What counts as good PPI? It depends on the device

There is no single "good" PPI number, because sharpness is density judged at a distance. A figure that looks coarse on a phone held 30 cm from your face is generous on a television watched from a sofa. Use these bands as a guide — each with the arithmetic behind it.

01

Phones: 300 PPI and up

Held closest, phones need the most density. Around 300 PPI is where most people stop being able to pick out individual pixels at reading distance, and current flagships run far past it — a 6.1-inch phone at 2556 × 1179 works out to about 461 PPI. Below roughly 250 PPI, text edges start to look soft.

02

Laptops: 140–250 PPI

A 14-inch laptop at 2880 × 1800 reaches about 243 PPI and looks crisp at arm's length. The long-running budget standard, 1920 × 1080 on a 15.6-inch panel, is about 141 PPI — perfectly usable, but visibly less sharp side by side. For text-heavy work, treat roughly 150 PPI as the comfort line.

03

Monitors: 90–165 PPI

At a desk distance of 60–80 cm, a 27-inch 1440p monitor (about 109 PPI) is the popular balance of space and sharpness, and the same size at 4K reaches about 163 PPI for truly smooth text. A 24-inch 1080p monitor, about 92 PPI, starts to show its pixel grid when you lean in.

04

TVs: 40–100 PPI is plenty

Distance does the work. A 55-inch 4K television is only about 80 PPI — half the density of the same resolution at monitor size — yet from 2–3 metres its pixels sit below what the eye can separate. Even a 1080p 55-inch set, at about 40 PPI, holds up for video at normal seating distances.

One comparison ties it together: a 3840 × 2160 panel has about 4,406 diagonal pixels whatever size it is built at. Spread across 27 inches that is 163 PPI; spread across 55 inches, 80 PPI. The resolution never changed — only the spreading did. That is why PPI, not the "4K" label, is the number that predicts how sharp a screen will look.

Two honest caveats. Some OLED phone panels use a PenTile subpixel layout, which shares subpixels between neighbouring pixels, so their real-world sharpness lands a little below what the headline PPI promises. And a high PPI only pays at native scaling: run a 243 PPI laptop at heavy display scaling and the interface is drawn as if the density were far lower — comfortable, but the crispness you paid for is spent on size instead.

Common screen sizes, resolutions, and PPI

Compare these calculated screen densities. Density bands use fixed PPI ranges; adjust viewing distance in the calculator to estimate whether pixels will be visible.

DiagonalResolutionPixels per inchDensity band
6.1″2556 × 1179461Ultra Retina
6.7″2796 × 1290460Ultra Retina
10.9″2360 × 1640264Retina
12.9″2732 × 2048265Retina
13.3″2560 × 1600227Retina
14″3024 × 1964258Retina
16″3456 × 2234257Retina
24″1920 × 108092Standard
24″3840 × 2160184Standard
27″2560 × 1440109Standard
27″3840 × 2160163Standard
27″5120 × 2880218Retina
32″3840 × 2160138Standard
32″7680 × 4320275Retina
55″3840 × 216080Standard
65″7680 × 4320136Standard

Screen and print calculations in one place

Switch between browser-assisted detection, screen density, print sizing, and device comparison without installing an app. Results update as you type, viewing-distance estimates explain pixel visibility, and the formula stays visible so you can check the calculation yourself.

RELATED TOOLS

Device Specs

Look up screen size, resolution, and PPI for popular phones, tablets, laptops, and monitors.

Open device specs

Ruler Tool

Measure real objects on screen with calibrated centimeter, millimeter, inch, and pixel scales.

Open ruler

Actual Size Index

Every length at true physical size — centimetres and inches on one index.

Open the size index

Credit card size

85.60 × 53.98 mm — the ID-1 standard at true size

See the card

PPI calculator: method and limitations

A PPI calculator divides the diagonal pixel count by the physical diagonal in inches. It helps compare display pixel density and calculate image dimensions for printing.

How does ppi calculator work?

PPI = √(pixel width² + pixel height²) ÷ diagonal inches. Dot pitch in millimeters = 25.4 ÷ PPI. A 3840 × 2160 display at 27 inches is about 163.18 PPI. Image pixels for printing = inches × target image PPI.

  1. Choose Screen mode and enter resolution and diagonal size.
  2. Read PPI and dot pitch; adjust distance to inspect the estimated sharpness threshold.
  3. Use Print or Compare for image sizing and comparisons.

What should I check before relying on it?

Use native resolution and an accurate diagonal. Browser detection can reflect scaling rather than native pixels. The one-arcminute viewing-distance threshold is a model, not an eyesight test or display certification.

References and responsibility

Maintained by Imran Ahmed, Online Ruler. Contact us about an error or a source that needs updating.