SCREEN DIAGNOSTIC TOOL

Dead Pixel Test

Test your monitor, laptop, smartphone, or tablet for stuck pixels, dead pixels, and screen defects. Use fullscreen color modes to detect display issues instantly.

Dead Pixel Tester Professional screen testing
Current Color White
Use arrow keys to cycle colors
Test Colors:

All testing happens in your browser. No data is uploaded or stored on servers.

HOW TO TEST

Detect dead pixels in three steps

Full-color screens help identify stuck pixels and display defects quickly and reliably.

1

Start the test

Click "Fullscreen" or press F to enter fullscreen mode. The tool expands to fill your entire screen with no distractions.

2

Cycle through colors

Use arrow keys or color buttons to change the display color. White, black, red, green, and blue surfaces reveal different pixel defects.

3

Look for anomalies

Scan the screen for dots or areas that don't match the color. These indicate stuck or dead pixels that need attention.

POWERFUL FEATURES

Professional screen testing capabilities

Fullscreen modeExpand to your entire monitor to check every pixel for defects.
Nine test colorsWhite, black, red, green, blue, cyan, magenta, yellow, and gray reveal different pixel issues.
Auto cycle modeAutomatically rotate through colors to spot unusual pixels easily.
Stuck pixel fixerRapid color cycling may help restore stuck pixels to normal operation.
Keyboard shortcutsPress F for fullscreen, A for auto-cycle, S for fixer, arrow keys for colors.
Mobile friendlyTest your smartphone or tablet screen with full touch support.
100% privateTesting runs entirely in your browser. No uploads, no tracking, no ads.
Works offlineUse the tool without internet after the page loads.

THE SCIENCE

Dead, stuck or hot: what is actually wrong with the pixel

Every pixel on an LCD or OLED screen is three subpixels — red, green and blue — each driven by its own transistor switching it on and off. A full-HD panel runs 2,073,600 pixels, over 6.2 million subpixels; a 4K panel runs nearly 24.9 million. When one fails, exactly how it fails decides what you see above — and whether the warranty cares.

Dead pixel — always blackThe pixel's transistors stop passing current, so all three subpixels stay off and the dot is black on every background. White and light test screens reveal dead pixels best. Because the failure is electrical rather than logical, a dead pixel almost never recovers on its own.
Stuck pixel — one fixed colourOne or two subpixels freeze on while the rest of the pixel still works, leaving a dot that glows a constant red, green, blue, cyan, magenta or yellow — easiest to spot on the black screen. Power still reaches the pixel, so it can sometimes be coaxed back: the rapid colour cycling of the fixer mode above is built for exactly this.
Hot pixel — always whiteAll three subpixels stuck fully on produce a bright white dot that glares on dark content. The name comes from camera sensors, where a photosite that leaks charge reads as maximum brightness; on a display it means the same visible thing — one pixel pinned at full brightness whatever the image says.
How many defects are acceptable?Panel makers grade screens under the ISO 13406-2 standard, and most mainstream warranties only replace a panel once defects pass a small threshold — commonly a handful of dead or bright dots, though the exact number varies by brand and model, and some premium lines promise zero bright dots. That is why the cheapest time to run this test is the day a new screen arrives, inside the return window, while one dot is still reason enough.

FAQ

Dead pixel test FAQ

What is a dead pixel?

A dead pixel is a pixel that remains off (black) or stuck in one color. It cannot display the correct color for the current display content.

What is a stuck pixel?

A stuck pixel displays the same color always, even when the display changes. It often shows red, green, or blue and may be fixable with color cycling.

Why test different colors?

Different colors reveal different pixel defects. Dead pixels stand out against bright colors, while stuck colors are easier to spot against opposite hues.

Does the stuck pixel fixer work?

The fixer uses rapid color cycling to stimulate stuck pixels. Success varies by hardware, pixel type, and defect age. It's worth trying before replacement.

Are dead pixels covered by warranty?

Warranty coverage for dead pixels varies by manufacturer. Most have thresholds (e.g., 3+ pixels) before replacement. Check your device warranty terms.

How accurate is this tool?

This tool displays full-screen colors accurately on modern displays. It detects virtually all pixel defects visible to the human eye.

RELATED TOOLS

Device Specs

Look up screen size, resolution, and PPI for popular phones, tablets, laptops, and monitors.

Open device specs

Actual Size Index

Every length at true physical size — centimetres and inches on one index.

Open the size index

Credit card size

85.60 × 53.98 mm — the ID-1 standard at true size

See the card

Dead pixel test: method and limitations

A dead pixel test fills the display with solid colors so you can look for pixels that stay dark, bright, or a different color. It is a visual inspection tool rather than an automatic hardware diagnosis.

How does dead pixel test work?

Inspect red, green, blue, white, and black screens at the display’s native resolution. A mark that remains in the same location across colors may indicate a pixel defect or surface contamination.

  1. Clean the screen and open a solid-color test.
  2. Inspect the screen while cycling through the colors.
  3. Confirm persistent marks and compare them with your manufacturer’s support policy.

What should I check before relying on it?

The test does not repair pixels or certify a display. Clean the screen, rule out dirt and reflections, and consult the manufacturer’s pixel policy for warranty decisions.

References and responsibility

Maintained by Imran Ahmed, Online Ruler. Contact us about an error or a source that needs updating.