The short answer
PPI means pixels per inch — how many pixels a screen squeezes into each inch. It is worked out from two numbers you already know: the screen’s resolution and its physical size. The formula is diagonal pixels ÷ diagonal inches, and the result decides both how sharp the screen looks and how large everything on it appears.
PPI in plain English
Think of a screen as a tiled floor. The resolution is how many tiles there are; the screen size is how big the floor is. Spread the same number of tiles over a bigger floor and every tile must be bigger — the pattern looks coarser. Pack them onto a smaller floor and the tiles shrink — the same pattern looks finer and sharper.
That is all PPI is: tile size, measured as tiles per inch. It is also why resolution alone never tells you how a screen will look. You need the second number — physical size — before “1920 × 1080” means anything about sharpness.
The worked example: one resolution, two screens
Take the world’s most common resolution, 1920 × 1080. Its diagonal pixel count is √(1920² + 1080²) = 2,202.9 pixels. Now put it on two different screens:
| Screen | Resolution | Diagonal | PPI |
|---|---|---|---|
| 15.6″ laptop | 1920 × 1080 | 15.6 in | ≈ 141 PPI |
| 24″ monitor | 1920 × 1080 | 24 in | ≈ 92 PPI |
Identical resolution, identical everything in the spec sheet’s headline — yet the laptop packs its pixels about 1.5× more densely than the monitor, so text and photos look noticeably finer on it. The monitor is not worse; it is just viewed from farther away, which is the subject of the “how much is enough” section below.
PPI vs DPI
The two terms get mixed up constantly, so here is the clean split:
- PPI — pixels per inch — belongs to screens. It describes displays and the images shown on them.
- DPI — dots per inch — belongs to printers. It describes how many ink dots a printer lays down on paper.
Design and photo software blurs the line by labelling image files with “DPI” when the value is really acting as PPI metadata. If the thing in question glows and has a power button, the number you want is PPI.
Why PPI changes how big things appear
PPI is not only about sharpness — it sets the physical size of everything on screen. A web page’s “inch” is defined as 96 CSS pixels. On a screen with a true density of 141 PPI, those 96 pixels physically span only 96 ÷ 141 ≈ 0.68 of a real inch; on a 92 PPI screen they span slightly more than an inch. Operating systems apply their own scaling to compensate, but it is a general-purpose approximation — it is almost never exactly your screen’s true density.
That gap is exactly why an on-screen ruler cannot just assume a density: left uncalibrated, it would show every size scaled by the difference. This site solves it by calibrating the ruler to your screen — measure once against a bank card, and the true PPI of your display is what every measurement uses from then on.
How to find your screen’s PPI
Three ways, fastest first:
- Use the PPI calculator. Enter your resolution and diagonal size; it applies the formula above for you.
- Look your model up in device specs. Phones, tablets and laptops are listed with their resolution, size and density already worked out.
- Measure the size first. If you know your screen’s width and height but not its diagonal, the screen size calculator converts them, ready for the PPI calculation.
And the formula itself, for any screen: PPI = √(width px² + height px²) ÷ diagonal in inches.
How much PPI is enough?
It depends on distance, because a pixel only needs to be smaller than your eye can pick out from where you sit:
- Phones (held close): roughly 300–500 PPI — the densest screens, because they are the closest.
- Laptops: roughly 110–230 PPI.
- Desktop monitors: roughly 90–165 PPI (a 27″ 4K monitor lands near 163 PPI).
- Televisions: often around 80 PPI or less — and perfectly sharp from sofa distance.
So “what is a good PPI?” has no single answer. The honest one is: enough that you cannot see individual pixels at your normal viewing distance — and now you know how to check whether your own screen gets there.
Not sure what density your screen should have? Run your numbers through the PPI calculator and see where it lands.